Bluetooth USB AUX Audio Cable Adapter Wireless Module For Audi A4 A5 A6 A8 Q7

$ 7.79

Brand: Unbranded Manufacturer Part Number: Does Not Apply gtin13: Does not apply UPC: Does not apply Country of Origin: China Type: Cable

Description

SAFE & SECURE SHOPPING 100% SATISFACTION GUARANTEED FAST SHIPPING Store Categories Store Categories Other DJI & RC Parts Game & Arcades Parts Watch Tools & Parts Auto Parts Headphone Parts Musical Parts Health & Beauty Home & Garden Toys Electronics B & I Military Models Office Suplies Outdoor & Sport You may also like You may also like 1 Pair Front Left+Right Bumper Side Marker Light For Dodge Durango 2021-2023 25.91 USD 28.79 USD 19.99 USD 10% off For Volkswagen Jetta 1K8823509S 2019-2023 Hood Lock Latch Bonnet Catch 18.71 USD 20.79 USD 19.99 USD 10% off 5 Gang Blue LED Rocker Switch Panel ON/OFF Car Marine Boat RV Circuit Kit 12/24V 11.51 USD 12.79 USD 19.99 USD 10% off 7" Flexible Air Tyre Valve Extension Adaptor Motorcycle Car Tire Stem Extender 8.27 USD 9.19 USD 19.99 USD 10% off Fast Tester Key Lock Coil Check EZS Checker Immobiliser For Mercedes for BMW 9.62 USD 10.69 USD 19.99 USD 10% off Universal DB Killer Exhaust Muffler Silencer Motorcycle Noise Sound Eliminator 13.79 USD 19.99 USD Bluetooth USB AUX Audio Cable Adapter Wireless Module For Audi A4 A5 A6 A8 Q7 Product Description Features: 1. Plug & Play: installed via original CD changer port, easy and fast, perfectly integrated with the car. 2. Wireless A2DP Playback: easily streaming music of Bluetooth devices into factory car stereo system. 3. Hi-fi Sound Quality: Connected to car stereo via wire harness, no interference and no loss of sound quality, rivaling original CD sound. 4. Allow you to easily have popular configuration of advanced car stereo, is the best choice for safe driving and enjoying digital music. Note: 1. Doesn't support hands-free phone call(HFP): It doesn't supports answer/hang up etc. Via car radio buttons and steering wheel buttons 2. Doesn't support Bluetooth AVRCP Control: Prev/Next Track, Pause/Play, Fast forward/backward via car radio buttons or steering wheel buttons. Installation Preparation: 1. This product operates on a vehicle with 12 volt or 5 volt DC negative ground system. Do not use it on other voltage system. 2. This product only fits OEM or aftermarket car stereo with CD changer port and different solutions of Bluetooth adapter would be adopted according to different brands of vehicles or different car radios. 3. Make sure car stereo is powered off before installation. Otherwise the car stereo may be damaged. It is suggested to install it a car dealer shop or professional car stereo store. 4. Usually, the car stereo needs to be removed so as to plug Bluetooth kit main connector into CD changer port on radio pack. For some car models, Bluetooth kit can be installed in glove box or trunk where external CD changer port is located. 5. Please read the car stereo wiring diagram carefully before installation (normally on the top side of car stereo). Check and confirm where are the following ports on back of the stereo:CD changer port, B+/Ub+/12V ACC port(different car stereos has different names. such as: BAT, Bup+,B-U,MEM +12, KL.30) and GND port. Installation Steps: 1. Turn off car engine and remove key from ignition, if car radio uses a security code, make sure that you have the code before unplugging the radio. 2. Unmount the radio from the dash in order to get access to the back side of the radio, and find CD Changer port at the back of the radio. For details of unmount, please refer to car user manual or car stereo manual, or ask professional staff to unmount the radio. 3. Connect wire harness to car stereo radio module unit in advance. Be sure to make a firm connection. Then attach the wire harness connector to the back of stereo to the CD changer port. 4. For some car models, connect the red wire to B+/Ub+/12V ACC port (different car stereos has different names. such as: BAT, Bup+,B-U,MEM +12, KL.30) or other correct ACC power or 5 / 12V battery power. Connect the black wire to GND port of head unit power module unit. 5. Turn on the car and power on car Head Unit, press CD (or Disc / Mode / CDC / SOURCE / AUX) button for once or twice to switch to music play mode. 6. Turn on the Bluetooth function of mobile phone, search and pair with Bluetooth device named “BT5909”, Mobile phone will be able to connect to BTA after paired successfully. Test with mobile phone to confirm whether Bluetooth music work normally. 7. After successful test, re-assemble the radio, and put wire harness and module unit box in proper place (glove box, storage box, etc.), fasten screws between module unit and wire harness. Put back car head unit into original position. Now the installation is finished. Important Installation Notes: 1. As to some vehicles with external CD Changer, which occupies original CD changer port, Parallel Harness is needed to keep the use of original CD changer (For some models only). Installation refers to former diagram. 2. As for Audi factory radio of mini ISO 8 pin, its CDC connector is 20-pin block. connector, in order to install our Bluetooth kit, it requires to cut the 8-pin part or connect with special Audi 20-pin adapter cable. 3. As for Clarion protocol radios, such as some Subaru radio and Suzuki radio, it requires to totally unplug the wire harness from car power before installation. Moreover, it is easy to plug connector in the opposite direction on Clarion radios, which causes short circuit. Make sure the connector is plugged in correct direction. 4. As for installation on CAN-Bus radios of Peugeot/Citroen, Renault, Ford (new) and Mazda (new) and Opel, it is required to unplug the radio from the power before installation. Otherwise, Bluetooth kit might not work properly or the radio might be damaged. Regarding Peugeot/Citroen without pre-installed CD Changer, to enable Bluetooth kit to work, the CD Changer function must be activated by professional tools. Please enquire the Peugeot/Citroen dealer on how to activate the CD Changer function. 5. As per BMW radios with CD Changer, the CD Changer must be completely disconnected before installation (The 3-pin and the 6-pin connector, both are located in the trunk, must be disconnected), otherwise Bluetooth kit will not be recognized. Besides, if the BMW radios are with DSP, extra DSP kit and specific Bluetooth kit would be used. Applicable Car Models: Toyota Honda Volkswagen Audi Benz Suzuki Nissan Porsche Ford Fiat Acura BMW Wolvo Mazda Skoda Peugeot Renault Citroen Opel,etc This product only needs to have AUX interface or the criginal Car CD player can be used with AUX interface. (Please consult or confirm that you have an AUX interface before purchasing) 1. Not compatible with stereos that have 6 CD Player built into the the stereo 2. Not compatible with the “blue & me “ Bluetooth audio streaming feature Also many devices from 2007 in connection with the Bluetooth model KCE-400BT. Specification: Voltage Input : 4.5V ~14.6V DC Operational Current : 600mA Standby Current : 20mA Operating Temperature: -35℃~+75℃ DAC Resolution : 20bit Total Harmonic Distortion : 0.05% SN Ratio : 90dB Frequency Response : 20HZ-20KHZ Package Included: 1 * cable Shipping Returns Contact Us Payment Shipping 1. Items sent from US warehouse. 2.Receiving time = Processing time + Shipping time 3. Processing Time: Around 1-2 business Days 4. Shipping Time: 3-5 business day it may have a little delay during some holiday (such as Christmas),any problem ,please feel free to contact Returns 1. 30 days warranty from the purchased date. Please contact us via email before returning the defective item. 2.Our warranty does not extended to any product that are physically damaged or that are not under normal operating conditions as result of misuse or improper installation on the buyer/user's part. 3.Return items should include the original packaging and all accessories. buyers MUST contact us for the returning address. 4.In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund. We will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item. Contact Us Pls contact us if you have any problems,we will try our best to solve for you Payment We accept all verified payment from eBay. Copyright © 2022 Tongtool

  1. The item was shipped promptly with the correct shipping and tracking information. The item was packaged adequately with padding and buffers to protect the contents from damage. The package arrived with an exceptionally fast shipment time. Upon opening the package, the condition of the contents were just as described. The appearance, quality and value of the Item exceeded my expectations. This transaction was a great sale, and the seller is obviously a reliable Merchant.

    saurabh mahajan
  2. seller was very kind and understanding when i thought it didnt arrive they helped me but it just turned out it was shipped to somewhere else so i got it and thats all i can say this seller needs good luck

    Peter Bournakas
  3. Packing good. Shipping good. As described. Good value.

    Khandaker5c8